Truck Accessories Truck Rubber Leaf Spring Mounting For HOWO T7

Product model

a: Check the installation and construction drawings of the plate Truck Accessories Truck Rubber Leaf Spring Mounting For HOWO T7, and pay attention to the main technical parameters such as the specifications, height, and load-bearing capacity of the plate rubber bearing. For PTFE skateboard rubber bearings, please also pay attention to the size, installation position and direction of the embedded steel plate;

b: When selecting plate Truck Accessories Truck Rubber Leaf Spring Mounting For HOWO T7, the maximum bearing capacity of the bearing should be consistent with the reaction force of the bridge fulcrum, and the allowable deviation range should be ±10%;

c: For curved, sloped, inclined and wide bridges, circular plate rubber bearings should be used. Rubber bearings with spherical crowns or slopes are not allowed to be used in highway bridge projects;

d: When the longitudinal slope of the bridge is not greater than 1%, the plate rubber bearing can be directly installed on the pier, but the thickness required for the influence of the longitudinal slope should be considered. When the longitudinal slope is greater than 1%, embedded steel plates (plus wedge-shaped steel plates), concrete pads (slope-padded stones) or other measures should be used to level the bottom of the beam to ensure that the supports are flat. The plate rubber bearing should be checked according to the relevant provisions of JTG D62 and can be used only after the calculation meets the specified requirements.

e: GJZF4 and GYZF4 type PTFE slide Truck Accessories Truck Rubber Leaf Spring Mounting For HOWO T7 should be installed horizontally. Upper and lower steel plates should be installed, and 5201-2 silicone grease should be applied between the PTFE slide plate and the stainless steel plate. A dust cover must be installed after installation; the PTFE slide plate of the support must not be placed on the bottom of the support, unlike the PTFE slide plate. The contacting stainless steel plates cannot be placed on bridge piers or pad stones.