SKF Deep Groove Ball Bearing SKF Bearing

SKF Deep Groove Ball Bearing SKF Bearing working principle

Deep groove ball bearings mainly bear radial loads, but can also bear both radial loads and axial loads. When it is only subjected to radial loads, the contact angle is zero. When deep groove ball bearings have large radial clearance, they have the performance of angular contact bearings and can withstand large axial loads. The friction coefficient of deep groove ball bearings is very small and the limit speed is also very high.

Bearing characteristics

SKF Deep Groove Ball Bearing SKF Bearing are the most commonly used rolling bearings. Its structure is simple and easy to use. It is mainly used to bear radial loads, but when the radial clearance of the bearing is increased, it has certain performance of angular contact ball bearings and can bear combined radial and axial loads. When the rotation speed is high and it is not suitable to use thrust ball bearings, it can also be used to bear pure axial load. Compared with other types of bearings with the same specifications and dimensions as deep groove ball bearings, this type of bearing has a small friction coefficient and a high limit speed. But it is not impact resistant and not suitable for bearing heavy loads.

After the SKF Deep Groove Ball Bearing SKF Bearing is installed on the shaft, it can limit the axial displacement of the shaft or housing in both directions within the axial clearance range of the bearing, so it can be axially positioned in both directions. In addition, this type of bearing also has a certain degree of alignment ability. When tilted 2′ to 10′ relative to the housing hole, it can still work normally, but it will have a certain impact on the bearing life.