Deep Groove Ball Bearing SKF deep groove ball Bearing

Deep Groove Ball Bearing SKF deep groove ball Bearing Precautions

For deep groove ball bearings, if the bearing load is too small during operation, sliding will occur between the ball and the raceway, causing scratches. Especially large deep groove ball bearings with heavy balls and cages have this tendency. In many cases, bearings will rust. There are many reasons for Deep Groove Ball Bearing SKF deep groove ball Bearing rust. Deep Groove Ball Bearing SKF deep groove ball Bearing The most common factors in our daily life are the following:

1) Due to poor sealing device, moisture, dirt, etc. are invaded;

2) The bearing has not been used for a long time, has exceeded the anti-rust period, and lacks maintenance.

3) The metal surface has large roughness;

4) Contact with corrosive chemical media, the bearings are not cleaned cleanly, dirt adheres to the surface, or the bearings are touched with sweaty hands. After cleaning, the bearings are not packaged or installed in time, and are exposed to the air for a long time, and are attacked by air moisture and contamination; contamination

5) Ambient temperature and humidity and contact with various environmental media; the anti-rust agent fails or the quality does not meet the requirements.